View MC0063W06030R_8572570.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ev-adf5904sd2z user guide ug-791 one technology way ? p. o. box 9106 ? norwood, ma 02062-9106, u.s.a. ? tel: 781.329.4700 ? fax: 781.461.3113 ? www.analog.com evaluation board for the adf5904 4-channel, 24 ghz receiver downconverter please see the last page for an important warning and legal terms and conditions. rev. 0 | page 1 of 14 features contains adf5904 4-channel, 24 ghz receiver downconverter accompanying software allows control of adf5904 functions from a pc evaluation kit contents ev-adf5904sd2z evaluation board additional equipment pc running windows xp or more recent version analog devices, inc., eval-sdp-cs1z system demonstration platform-serial (sdp-s) board spectrum analyzer (optional) oscilloscope 5 v power supplies usb cable documents needed adf5904 data sheet required software analog devices adf5904 software general description the ev-adf5904sd2z evaluation board allows the user to evaluate the performance of the adf5904 24 ghz receiver downconverter. figure 1 shows the board, which contains the adf5904 , five high frequency sma connectors for the local oscillator (lo) input, four receiver (rx) inputs, eight sma connectors for the baseband outputs, banana connectors for power supply, and a connector for serial interface. the evaluation kit also contains software that is compatible with windows? xp and later versions to allow easy programming of the device. this evaluation board requires an eval-sdp-cs1z sdp-s board (not supplied with the kit). the sdp-s board allows software programming of the adf5904 device. full specifications on the adf5904 are available in the product data sheet, which should be consulted in conjunction with this user guide when working with the evaluation board. evaluation board photograph figure 1. 12895-001
ug-791 ev-adf5904sd2z user guide rev. 0 | page 2 of 14 table of contents features .............................................................................................. 1 ? evaluation kit contents ................................................................... 1 ? additional equipment ..................................................................... 1 ? documents needed .......................................................................... 1 ? required software ............................................................................ 1 ? general description ......................................................................... 1 ? evaluation board photograph ......................................................... 1 ? revision history ............................................................................... 2 ? quick start guide ............................................................................. 3 ? evaluation board hardware ............................................................ 4 ? power supplies ...............................................................................4 ? input signals...................................................................................4 ? output signals ...............................................................................4 ? default operation .........................................................................4 ? evaluation board software ...............................................................5 ? evaluation and test ...........................................................................7 ? evaluation board schematics and artwork ...................................8 ? ordering information .................................................................... 13 ? bill of materials ........................................................................... 13 ? related links ................................................................................... 13 revision history 3/15revision 0: initial version
ev- adf5904sd2z user guide ug-791 quick start guide follow these steps t o quickly evaluate the adf5904 . 1. connect the power supply to the ev - adf5904sd2z : a. 5 v to b anana c onnector p2 b. gnd to b anana c onnector p1 2. install the adf5904 software. 3. connect the sdp - s motherboard to the pc and to the ev - adf5904sd2z evaluation board. 4. follow the hardware driver installation procedure. 5. run the adf5904 software. 6. select the adf5904 device and the usb board in the select device and connection tab of the software fron t p anel window (see figure 2 ). 7. check that the message sdp board connected appears at the bottom left of the software window (see figure 2 ). 8. connect an ac - cou pled rf source to loin sma and connect an ac - coupled rf source to one of the rx x in input smas . 9. in the main controls tab , click initialize . 10. conn ect the corresponding rx b aseband channel output to an oscilloscope . 11. measure the results. rev. 0 | page 3 of 14
ug-791 ev- adf5904sd2z user guide evaluation board hardware the evaluation board requires an sdp - s motherboard to program the device. the sdp - s board is not included and must be purchased separately. the ev - adf5904sd2z schematics are shown in figure 5 to figure 9 . the top layer and assembly layout are shown in figure 10. power supplies the evaluation board is powered via one external supply , 5 v connected as described in the q uick s tart g uide section . i nput s ignals the lo input pin a nd the rx input pins on the adf5904 contain a dc bias voltage; the inputs must be ac - coupled to the evaluation board . o utput signals the baseband outputs from the adf5904 contain dc bias voltage s and are available on the j3 to j11 output smas. table 1 . baseband output mapping rx input b aseband outputs rf1in j3, j4 rf2in j6, j7 rf3in j8, j9 rf4in j10, j11 default operation all components necessary for adf5904 operation are inserted on the board. rev. 0 | page 4 of 14
ev-adf5904sd2z user guide ug-791 rev. 0 | page 5 of 14 evaluation board software the control software for the ev-adf5904sd2z is included in the evaluation kit on a cd. to install the software, follow the on-screen instructions. to run the software, click the adf5904 file on the desktop or from the start menu. in the select device and connection tab, select the device and the connection method, and click connect. confirm that analog devices eval board connected is displayed at the bottom left of the window (see figure 2). otherwise, the software has no connection to the evaluation board. note that, when connecting the board, it takes approximately 5 sec to 10 sec for the status label to change. figure 2. software front panel displayselect device and connection 12895-002
ug-791 ev-adf5904sd2z user guide rev. 0 | page 6 of 14 the main controls tab controls the adf5904 device settings (see figure 3). this tab allows the user to select general options available for the adf5904 , including power up/down control and register readback. on initial power-up of the device, click the initialize button to perform the initialization sequence as described in the adf5904 data sheet. figure 3. software front panel displaymain controls 12895-003
ev-adf5904sd2z user guide ug-791 rev. 0 | page 7 of 14 evaluation and test to evaluate and test the performance of the adf5904 , take the following steps: 1. install the sdp-s software drivers. connect the evaluation board to a pc using the supplied usb cable. follow the hardware driver installation procedure that appears. 2. connect the sdp-s connector to the ev-adf5904sd2z . 3. install the adf5904 software. 4. connect an ac-coupled rf signal to loin sma. 5. connect an ac-coupled rf signal to the rx1in input sma. 6. connect a 1 m, ac-coupled oscilloscope to the j3 and j4 output smas. 7. run the adf5904 software. 8. select the sdp-s board and the adf5904 device in the select device and connection tab of the software window. 9. in the main controls tab, click initialize to power up the adf5904 (see figure 3). see figure 4 for the suggested setup. 10. measure the baseband output signals. figure 4. typical evaluation setup pc power supply signal source signal source oscilloscope +5v dc block sdp-s adaptor board 12895-004
ug- 791 ev- adf5904sd2z user guide eval uation board schemat ics and artwork figure 5. evaluation board schematic (page 1) rx3_rf rf1in rx3_bbob j2 loin 1 2 3 rf3in 1 2 3 0 0 tp4 tp3 tp2 tp1 j4 j6 j7 j8 j9 j10 j11 j3 r3 3 2 1 rf2in rx1_bbo rx2_bbo rx2_bbo rx1_bbob rx3_bbo rx4_bbo rx4_bbob rx4_bbob rx4_bbo rx1_bbo dout ce data clk avdd rx2_bbob rx3_bbob 0 1 2 3 lo_in rx4_rf rx2_rf rx3_bbo rx2_bbob rx1_rf rf4in le r2 r1 rx1_bbob block2 lo_rfin rx4_rfin rx3_rfin rx2_rfin rx1_rfin le clk data ce dout rx12_ahi rx34_ahi lo_ahi rx1_bbo rx1_bbob rx2_bbo rx2_bbob rx3_bbo rx3_bbob rx4_bbo rx4_bbob atest j1 p2 p1 avdd agnd power avdd1 vdd avdd dout le clk ce data avdd interface clk dout ce le data avdd 12895-005 rev. 0 | page 8 of 14
ev- adf5904sd2z user guide ug- 791 figure 6. evaluation board schematic (page 2) 1 tp6 1 tp7 1 tp8 1 tp9 1 tp5 r16 r13 r17 r19 r20 r18 r12 r14 r15 r10 r8 r9 r11 r4 390 data dout le 330 8.2k 10k avdd 330 330 390 390 390 10k 0 330 0 0 ce clk io io io io io io dgnd dgnd sdp-s spi_mosi spi_miso spi_sel_b spi_sel_c spi_clk spi_sel_a gpio7 gpio6 gpio5 gpio4 gpio3 gpio2 gpio1 gpio0 12895-006 rev. 0 | page 9 of 14
ug- 791 ev- adf5904sd2z user guide figure 7. evaluation board schematic (page 3) eeprom 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 j5 7 4 8 5 6 3 2 1 u3 r6 r7 r5 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 j5 spi_sel_a gpio1 gpio3 gpio5 gpio7 spi_mosi spi_miso spi_clk fx8-120s-sv(21) gpio2 gpio4 vio 100k 100k fx8-120s-sv(21) 24lc32a-i/ms tbd0603 spi_sel_b spi_sel_c gpio0 gpio6 io io io io io io io io io io io io io io vss vcc wp a2 a1 a0 scl sda dgnd dgnd 12895-007 rev. 0 | page 10 of 14
ev- adf5904sd2z user guide ug- 791 figure 8 . evaluation board schematic (page 4) figure 9 . evaluation board schematic (page 5) l1 a c d2 a c d1 c11 c10 c12 r25 r21 r26 r24 r23 r22 1 8 2 7 pad 4 6 3 5 u2 vdd mbr0540t1g 4.7uh 1uf 0 1uf adp7104 1uf 0 avdd1 avdd 0 0 0 1n4001 0 io io agnd io agnd agnd agnd agnd agnd sense pad vin pg gnd en nc gnd vout 12895-008 pad 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 u1 c8 c7 c6 c5 c3 c9 c4 c1 c2 rx1_rfin lo_rfin rx1_bbo rx1_bbob rx2_bbo rx3_rfin rx34_ahi rx4_bbob 10pf 100pf 1000pf 10pf 100pf 10pf 100pf 1000pf 1000pf rx12_ahi lo_ahi rx34_ahi adf5904 ce dout atest rx4_bbo data clk le rx2_bbob rx4_rfin rx3_bbo rx3_bbob lo_ahi rx2_rfin rx12_ahi agnd agnd in in in in in in in in in in in in in in in in in in in in in in agnd agnd 12895-009 rev. 0 | page 11 of 14
ug- 791 ev- adf5904sd2z user guide figure 10 . layer 1 (component side) 12895-010 rev. 0 | page 12 of 14
ev-adf5904sd2z user guide ug-791 rev. 0 | page 13 of 14 ordering information bill of materials table 2. qty reference designator description manufacturer part number 3 c1, c2, c6 0.1 f capacitor avx 06033c104jat2a 3 c3, c4, c7 1000 pf capacitor murata grm1555c1h102ja01 3 c5, c8, c9 10 pf capacitor avx 04025u100gat2a 1 d1 diode multicomp 1n4001 1 d2 diode on semiconductor mbr0520lt1g 10 j1 to j4, j6 to j11 connector, pcb, end launch, sma emerson 142-0701-851 1 j5 120-way connector, 0.6 mm pitch hirose fx8-120s-sv(21) 1 l1 4.7 h inductor coilcraft epl2014-472ml 5 loin, rf1in to rf4in 2.92 mm rosenberger connectors rosenberger 02k243-40m 1 p1 black, 4 mm, banana socket deltron 571-0100 1 p2 red, 4 mm, banana socket deltron 571-0500 3 r4, r8, r10 330 resistor vishay crcw0603330rfkea 4 r11, r12, r14, r15 390 resistor multicomp mc 0.063w 0603 390r 1 r17 10 k resistor multicomp mc 0.063w 0603 10k 1 r19 8.2k resistor multicomp mc 0.063w 0603 1% 8k2 1 r20 10 k resistor multicomp mc 0.063w 0603 10k 2 r5,r7 100 k resistor yageo (phycomp) rc0402jr-07100kl 1 r6 do not populate not applicable not applicable 9 tp1 to tp9 connector, pcb, test point, red keystone electronics corp 5000 1 u2 linear regulator, 3.3 v, 20 v, 500 ma, ultralow noise analog devices adp7104ardz-3.3 1 u3 32k, i 2 c, serial eeprom, msop8 microchip 24lc32a-i/ms 2 screw1, screw2 screw, cheese, nylon allthread 119030010 2 nut1, nut2 nut/washer, nylon duratool 1140030 1 u1 adf5904 rx mmic analog devices adf5904bcpz 4 r21, r22, r25, r26 0 resistor multicomp mc 0.0625w 0402 1% 0r 1 r24 0.33 resistor welwyn lrcs0402-0r33ft5 1 r23 do not populate not applicable not applicable 1 c12 100 f capacitor kemet t520b107m006ate040 1 c11 10 f capacitor murata grm21br61a106ke19l 1 c10 1 f capacitor taiyo/yuden tmk107bj105ka-t 1 r16 do not populate not applicable not applicable 1 r9 do not populate not applicable not applicable 5 r1, r2, r3, r13, r18 0 resistor multicomp mc 0.063w 0603 0r related links resource description adf5904 product page, 4-channel, 24 ghz, receiver downconverter adp7104 product page, 20 v, 500 ma, low noise, cmos ldo
ug-791 ev-adf5904sd2z user guide rev. 0 | page 14 of 14 notes esd caution esd (electrostatic discharge) sensitive device . charged devices and circuit boards can discharge without detectio n. although this product features patented or proprietary pr otection circuitry, damage may occur on devices subjected to high energy esd. therefore, proper esd precautions should be taken to avoid performance degradation or loss of functionality. legal terms and conditions by using the evaluation board discussed herein (together with an y tools, components documentation or support materials, the ev aluation board), you are agreeing to be bound by the terms and conditions set forth below (agreement) unless you have purchased the evaluation board, in which case the analog devices standard terms a nd conditions of sale shall govern. do not use the evaluation board until you have read and agreed to the agreement. your use of the evaluation board shall signify your acceptance of the agreement. this a greement is made by and between you (customer) and analog devices, inc. (adi), with its principal place of busi ness at one technology way, norwood, ma 02062, usa. subject to the terms and condition s of the agreement, adi hereby grants to customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable li cense to use the evaluation board for evaluation purposes only. customer understands and agrees that the evaluation board is provided for the sole and exclusive purpose referenced above, and agrees not to use the evaluation board for any other purpose. furtherm ore, the license granted is expressly made subject to the following additional limitations: customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the evaluation boar d; and (ii) permit any third party to access the evaluation board. as used herein, the term third party includes any entity other than adi, customer, th eir employees, affiliates and in-house consultants. the evaluatio n board is not sold to customer; all righ ts not expressly granted herein, including ownership of the evaluation board, are reserved by adi. confiden tiality. this agreement and the evaluation board shall all be c onsidered the confidential and proprietary information of adi. customer may not disclose or transfer any portion of the evaluation board to any other party for any reason. upon discontinuation of use of the evaluation board or termination of this agreement, customer agrees to promptly return the evaluation board to adi. additional restrictions. cu stomer may not disassemble, deco mpile or reverse engineer chips on the evaluation board. customer shall inform adi of any occurred damages or any modifications or alterations it makes to the eval uation board, including but not limited to soldering or any oth er activity that affects the material content of the evaluation board. modifications to the evaluation board must comply with applicable law, including but not limited to the rohs directive. termination. adi may terminate this agreement at any time upon giving written notice to customer. customer agrees to return to adi the evaluation board at that time. limitation of liability. the evaluation board provided here under is provided as is and adi makes no warranties or representations of any kind with respect to it. adi specifically disclaims any repres entations, endorsements, guarantees, or wa rranties, express or implied, related to the evaluation board including, but not limited to, the implied warr anty of merchantability, title, fitness for a particular purpos e or noninfringement of intellectual property rights. in no event will adi and its licensors be liable for an y incidental, special, indirect, or consequential damages result ing from customers possession or use of the evaluation board, including but not limited to lost profits, de lay costs, labor costs or loss of goodwill. adis total liabilit y from any and all causes shall be limited to the amount of one hundred us dollars ($100.00). export. customer agrees that it will not directly or indirectly export the evaluati on board to another country, and that it will comply with all applicable united states federal laws and regulations relating to exports. governing law. this agreement shall be governed by and constru ed in accordance with the substantive laws of the commonwealth of massachusetts (excluding conflict of law rules). any legal action regarding this agreement will be heard in the state or federa l courts having jurisdiction in suffolk county, massachusetts, and customer hereby submits to the personal jurisdiction and venue of such courts. the united nations convention on contracts for the international sale of goods shall not apply to this agreement and is expressly disclaimed. ?2015 analog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. ug12895-0-3/15(0)

▲Up To Search▲

Price & Availability of MC0063W06030R

	To Download MC0063W06030R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .